Current DIY Projects

 These are some pictures of some current DIY synthesizer projects.  This first one is a 10 step sequencer with a 555 clock.  I used different colored LEDs for each step (not sure if this will mess up functionality yet).

The next one is my DACPOD.  This will be mounted in a case and combines a simple resonant VCF with an Atari Punk Console and my blinking light circuit to give it two flashing LEDs.

 This circuit is supposedly a snare drum but it needs a couple of capacitors and a transistor yet.

This is a Rossler Attractor chaotic oscillator circuit.  Should have put some caps on the outputs for this one.

This circuit combines (left to right) a control voltage mixer, a voltage controlled resonant low pass filter, and a NANDsynth oscillator as well as blinking LEDs along the top.  This circuit ended up as my Steam Drone box.